Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Features:
Rhino-Rack Vortex Aero Crossbars - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys. It's Randy here at etrailer.com. Today we're doing a demo on the Rhino Rack Vortex Aero Crossbars. These are aluminum aero-shaped crossbar, of course they're designed to work with your Rhino Rack fit kit or leg kit, those are going to be sold separate.As you can see here, this is going to give us a spot on our roof to clear up a lot of space inside our vehicle. We've got a bike rack attached here, simply comes down, straps right around it. Gives us a excellent way to get that transported if we don't want something hanging off the back of our vehicle or if we don't want to take the whole thing apart and try to shove it inside.The aluminum crossbars are going to be lightweight and they're going to be very corrosion resistant, we're not going to have to worry about any kind of corrosion and eventually it dripping down on our vehicle.Now these crossbars are available in several different lengths, so depending on smaller vehicle, larger vehicle, we're going to have the right crossbar to match up with your vehicle.
They're also going to be available, not only the black that we see here, but silver. If you don't like the way a black roof rack looks, you can see with this silver side rails kind of blend in a little bit more if we had silver. That's kinda going to be up to you.The end cap here is something that they have provided a plastic core lock for. You just place this in here, rotate it to the unlock position, that's going to slide off for us. These can very easily be replaced with a locking core if you want a keyed lock to keep everything safe and secure, you can go that route also.Not only does our strip here keep our items from sliding side to side, but it's also going to protect the channel underneath from things running down in and for T-Slot type accessories this thing can be cut, put right back in.
This is going to do an excellent job of eliminating any noises that wind comes across. It won't get in that channel, we're not going to hear any of it.The bars are anodized fully through. Even on the inside here, if moisture happens to get in there and collect, we're not going to have to worry about corrosion. These give us excellent strength. You can see it's hollow, that helps it to stay nice and lightweight, but we have all the integral support here, gonna make 'em extremely, extremely durable.
They will really exceed well past that 165 pound weight rating that they offer, but it's not something you wanna do.The larger rectangle that we have here, that's where we slide in any of the foot pegs that we might need to match our particular vehicle.To ensure that you're accessories that you already have are going to fit or to ensure that you're getting the right accessories, just want to give you the dimensions real quick on our crossbars. From our front edge to our rear edge, we've got about 3-1/8 of an inch, then from the bottom up to the top, it's going to be an inch and 3/16. As long as your accessories are designed to fit that, which most of 'em on the market today are, won't have any issues.I really like the way this roof rack system looks. There are roof rack systems however, that will not overhang like this. Overhanging like what we have here, that gives you additional room for accessories and stuff.
Some people they'll prefer more of a factory look or more of a sleek look. In that case, I think I'd recommend one of the roof rack systems that come and end in the foot pack. We'd have our bar that comes over, but it's going to end right here in this area and be a little bit more sleek than what we have here with our overhanging aero bars from Rhino Rack.That's going to do it for our look at the Rhino Rack Vortex Aero Roof Rack Crossbars.
Average Customer Rating: 4.8 out of 5 stars (24 Customer Reviews)
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
Look great, and function great. Just make sure you find all the parts packaged inside the rails themselves after you open the box!
Great strength and look. I love em. About to put on the kayak racks and get some fishing going.
I own a 2013 Honda CRV I purchased a couple months ago. It has a naked roof and no rack or side bars, and I wanted to be able to carry up to three kayaks. I didn't really want to buy and install the side bars, and then the cross bars also. I also needed the cross bars to be a little wider than the vehicle itself, as I own two Ocean Kayak Scupper Pros, and a Venus.
This Rhino Rack package looked like a great option for my needs. Weight wise, the three boats come right to the limit. Other racks had lower weight limits, and wouldn't work.
I had a couple issues with the initial package, but etrailer took care of the problem right away, and sent out what I needed.
Installation was pretty smooth. I recommend reading and rereading the instructions, before you cut anything. The videos on the etrailer website or directly on YouTube are very helpful to see all the steps. I'd like to see more personalized instructions added in the future, just to to make everything even smoother. Make sure you identify your vehicle and the bar you received on the kit instructions before you start.
These bars are so wonderful. The aero bars make no noise when driving and no whistling that I can tell. They don't seem to effect my gas mileage. I made sure the top rubber strips and bottom measurement strips were cut perfectly with no gaps, as this is important to prevent whistling.
They look so stylish. I get complements on them, and people can't believe they are after market, and that I installed them myself. They really complement the vehicle. Once installed the first time, I can take them off or put then back on in about 12 minutes. I don't really plan to take them off though. I don't use car washes, and I like the look of them on my vehicle.
I made sure to not overtighten them, and then tightened them a few times over the next week and with a couple kayaking trips. These babies are strong and I can't make them move when I test them. I still check them regularly to make sure they are secure, for safety purposes.
I highly recommend this Rhino Rack package. They know how to make the perfect roof rack and you can tell the quality and thought that went into them. Look at my photos I have included.
Thank you to etrailer for such great service. You made the whole process so pleasant and easy.
Holds two kayaks on the roof rock steady. Did some highway miles, back roads, bumpy roads, all locked in place. The problem is that when there are no kayaks up there, the wind creates a very loud whistle sound that grows with the speed. Its gotten so bad that we tend to avoid using the car these are on for anything but driving kayaks around. Probably going to have to remove them for daily driving and put them on again when its kayaking time.
I give all 5 stars for the product and service, but...I prefer the parts to be all in one carboard, also I was a little panicking looking for blue plastic key...It was inside of cross-bar ??not falling out with strips. Anyway,
I"m owner of Honda cr-v 2022 with bare roof ,and I just installed the rack. Was it simple enough? Yes,so I can share this:
First, rubber pads are all the same, and after placements to plastic legs should be placed with arrow*out*-that is it(a lot of info regarding vertical parts, that they are all different)??
Second, on other hand, in video we informed that clamps are same -they are not. Bigger "hooks" are for rear bar, smaller ones-for the front one.
Third, do not expect precision in rubber pads position(especially on rear bar)regarding plastic rail strips on bare roof.it is not achievable, just try to make same look on both sides.
I was worried about rain and water gets inside. Well, let us see.
What I plan to care on rack? Just a small 6ft step ladder. Believe me or no CR-V is my business vehicle ,and ladder carry was the goal of rack purchase. And only question I have if I can get to underground parking with no problems to cross the front entries usually limited with 6 ft in heights I will find out soon, but rack height plus ladder on it makes me worry.??The review will be update soon. regards.
These crossbars are perfect! I have a Pelican Cargo Box that I put on the rack when I'm traveling and it is 100% secure. They are pretty noisy, especially when driving perpendicular to the wind direction, but I expected that considering they are sitting on top of a tall truck. The rubber pieces that fit into the tracks are still in good shape and haven't cracked or loosened. They look good on my all black truck, too.
Installation was easy and I haven't had any issues. I had originally ordered a wrong part, but the person I spoke with at etrailer made it very easy to correct this and get the parts I needed. The next time I need something from my truck, I'll be checking here first.
I liked doing business with you. I like the products I ordered. I did have trouble with part of the shipping. It was not your fault, but the part of the shipping you used The USPS did not work. I neverrnecieved the item from them and you had to ship me another via UPS. Over the last 10 years I have had a number of problems with the USPS with packages and mail. They are especially difficult to get information from when something seems to be lost. I would recommend not using the USPS for your shipping needs. Again, I am very happy with you and the products I bought from you.
These Aero Racks are perfect on my Scion XB, stylish cool look & importantly Quiet with absolutely no wind noise! Also bought the Rocky Mount Cargo Basket & it comes WITH a full bunji net cover. It is also quiet with no wind noise & you can tie surf gear on top like racks (use padded rack pads) & or put things inside for more carrying space. Also a cool stylish look on the Scion XB or any other compact car like my wifes Toyota Yaris... We move it back & forth to who ever needs the Cargo Basket for the days Adventure.
I purchased a full kit for my 2017 Ford explorer, connectors, Feet and these cross bars. I will use them for hauling my roof top box on trips as well as other things that will not fit in my vehicle. The install is farily simple however some of the tools provided for tightening are not the best. Luckily I had a number of other tools to get this complete. The main thing I feel is needed is a socket allen key to tighten down the cross bars nice and tight. The allen key provided is difficult to work with and get the leverage you need to snug the bars down.
Another tip is to be sure to use the excess measuring closure to close off the inside of underside of the bars. Use a box cutter to cut the excess and fit it to the inside. I read some reviews about noise and I have zero noticeable noise. Do not tighten the bars down until you have this all inserted in and slid under the feet. Then snug it all down. If you do these things and close all the gaps the bars are almost silent.
The bars look great on the vehicle and seem very sturdy and solid. I would have no reservations hauling ladders, lumber and all of the typical stuff you see on roof racks. The rubber strips are heavy duty and add a nice non slip feel to the top of the bars.
Very nice bars that I mounted on a 2019 Highlander. I have owned multiple vehicles with Thule square and Yakima round bars that were noisy. These are so quiet I don’t know they are there. Very sturdy, and the rubber insert helps to keep load from sliding.
I purchased Rhino-Rack Vortex Aero Crossbars with Rhino-Rack 2500 Series Legs (RRRLKVA) and Fit Kit (DK284) for my 2020 Honda CR-V EX Hybrid. The rack was easy to assemble and took about an hour. The only tool not supplied that you need is a sharp knife or scissors to cut the rubber strips to length. Once assembled, the installation took about 30 minutes, making sure to measure accurately for placement. I used blue painter's tape to initially mark the locations. I then placed the white marking arrows (supplied) to align with the marks on the tape. I then removed the tape, placed the racks aligned with the arrows, and tightened the clamps.
This product seems well made and engineered (I'm a retired mechanical engineer). Kudos to Rhino-Rack and to etrailer for selling it.
Good sturdy product. Only reason I don't give 5 stars is that the lockable plastic cover on each ends of the bars, some don't lock, seems like a little lack of adjustment. Other than that, very satisfied.
Fairly easy to install onto my 2017 Honda CR-V. The crossbars feel very sturdy and are securely attached to the vehicle. Took me about 30 minutes to get it installed and could be done even quicker if you get help from another person. The bars themselves are a little fat so my Thule ski rack has a super tight fit. There is very minimal wind noise, so I'll probably be getting a fairing for that. The instructions felt a bit jumbled but with just the measurements alone, you can install it with a bit of common sense.
The crossbars are great, but the rubber strip in the middle gets bunched up or comes out when loading heavy items across the bar. But the rubber provides grip, and the grip is amazing. I am not worried about kayaks or rafts sliding around. I do need longer ones though...
I used this rack to mount two 65lbs kayaks to my vehicle and travel. One of many trips was over a thousand miles (round trip) and they moved maybe half a centimeter a piece during. I was extremely pleased with how easily I could adjust them. The original shipment had everything that was supposed to be in it and the directions were realitively clear. I had them together and on in roughly an hour. Also, they look great. When they are off the roof the only issue I have arises. The rubber feet that sit directly on the roof tend to fall off easily. Not a big deal.
Exactly what I was looking for but listed as 'not verified for my vehicle' used with the SX009 on my 2024 Seltos S. Looks right to me.
Solid platform for all your gear. Easy to install and adjust, great looking as well. Initially I was frustrated because I failed to insert the plastic ruler under the cross bar. If you don't cover all the gaps they will whistle like crazy!
The instructions don't tell you that...I had to call Rhino tech support. They are quiet now at any speed.
I'd buy them again for sure!
This is Thai Khuu ,Thanks I got packaged ,and I already installed, It just take about 1 and 1/2 hour,but I just take time to do carefully,so it is took me 2 hours, It is great ,me and my wife like it,and I my order the other package exactly like this for my second acura mdx 2016, I enclosed the pictures installed roof rack , Thanks
We love these racks! They were easy to install with the website videos. They whistle a bit but honestly it’s not terrible. The racks we got for our kayaks fit perfectly. Bonus - I can still open the panoramic roof!
Very straight forward to install. Took about a half hour in total. No whistling whatsoever. They look awesome on my 2016 Ford Explorer Sport! Especially with my running boards and tires...
Waiting on my Rhino basket to get here to install that next!
AERO BARS HAGING IN THERE.THE ONLY THING THAT I DIDNT LIKE ABOUT THE AREO BARS IS PUTTING ON A ROOF RACK. ONCE FITTED AND ADJUSTED THE RUBBER ON TOP OF BARS IMPRESS INTO THE BAR. FIXING THAT I CUT SOME RUBBER PIECES TO COVER THE IMPRESSIONS. STILL A GOOD PRODUCT.
Extremely sturdy and well made. I also like the locking endcap design. Only thing I dodnt like is the rubber channel strip is 4 separate pieces instead of one long strip. Maybe they do that so you can remove a section for installing accessories, but id prefer to simply cut it where needed.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.